Okatie, SC (January 5, 2020)– Officials of Beaufort-Jasper Water and Sewer Authority (BJWSA) and South Carolina Department of Health and Environmental Control (SC DHEC) are advising residents in the Levy Community to boil their water before using for drinking, cooking or dishwashing. The advisory area includes Telfair, SCAD Center, Delta Estates, as well as South Okatie Highway south of Lewis Pentecostal Church.
This is due to a pressure drop from a waterline break.
SC DHEC requires that water utilities issue a boil water advisory as a precautionary measure when such an event occurs that allows the possibility for bacteria to enter the public water system. Such an event may include a loss of water pressure, which could allow bacteria in soil and groundwater to enter water pipes through cracks or leaks. A drop in pressure could also cause backflow, which is best defined by the example of a garden hose in a bucket of dirty water “sucking” that water back into the public water system when the water pressure drops, although backflow prevention valves make this unlikely.
BJWSA will retrieve samples of the drinking water after the line is repaired, in order to ensure that no harmful bacteria are present. Results are expected by Tuesday afternoon. Upon confirmation that the water is safe, the precautionary advisory will be lifted, and residents of the area will be notified. Please see our website for the latest information: www.bjwsa.org.
Residents and businesses in the affected area are urged to use boiled or bottled water for drinking, making ice, brushing teeth, preparing food and giving to pets until further notice. Boiling kills bacteria and other organisms that may be present in the water. Some water filters do not protect against bacteria, so customers with filters are advised to contact the manufacturer for more information or boil their tap water. The water is safe for bathing and doing laundry.
Residents may purify the water by using one of several methods.
Disinfection instructions are as follows:
A. If water does not appear to be clear, strain through a clean cloth into a container to remove any sediment or floating matter. If water is clear, omit this step.
B. Disinfection by heat:
1. Boil the water vigorously for at least one minute.
2. After allowing the water to cool, it is ready to use. If desired, a pinch of salt added to each quart of water or pouring it back and forth from one clean container to another several times will improve the taste
C. Chemical Disinfection:
Use common liquid chlorine laundry bleach. Read the label to find the percentage of available chlorine and then follow the table below:
Chlorine Drops to be added per quart of water for
Clear Water Drops to be added per
Quart of water for
4 to 6 % 2 4
7 to 10% 1 2
Unknown 10 20
1. Mix thoroughly by stirring or shaking water in container.
2. Let stand for 30 minutes.
3. A slight chlorine odor should be detectable in the water. If not, repeat the dosage and let stand an additional 15 minutes before using.
4. Water is now safe for use.
Residents are urged to tell their neighbors about this situation who may not receive this message.
Information can also be found at www.bjwsa.org.
For further information, residents can contact BJWSA at 843-987-9200 or firstname.lastname@example.org.